Setup 2 screen bridges on the same side for a single monitor

[AntoninJcb]

Hi, I use a 3 monitors set-up, with a widescreen (21:9 25") over my laptop monitors (16:9, 15"), as shown in the picture bellow.

Unfortunately, I can't setup 2 screen bridges on the same side of my monitor. It would be perfect if I could, as my widescreen is placed over my two other screens.
If I put only one bridge, I have, depending on how far I stretch the upper bridge, either one of my 2 other screen is left-off, either an uncomfortable experience with the 2 bellow monitors sharing the same bridge of the upper monitor (picture bellow).

Can you help me through this?
Thank you for you help!

[r-Larch]

Hi @AntoninJcb,

I'm sorry, but a three monitors set-up, like yours, is not supported right now.
And it would be very difficult for me to add this feature, as long as I don't have 3 monitors to simulate your set-up.
If you are interested in providing a PR, I would be happy to merge it 😉

Alternatively, you can have a look at LittleBigMouse. It's similar to MouseTrap with the only downsides of its big installation size, hight CPU, and Memory requirements and as I tried it the last time, it was not possible to fine-tune curser teleportation, but it could work with your set-up and has a lot more settings and options.

I hope I could help.
have a nice day.

[AntoninJcb]

Hi @r-Larch !

Thank you so much for your answer. I already tried LittleBigMouse but never could make it working well on my set-up, for quite the same reasons you've mentioned.

Also, you can check on your side Spacedesk, server-side driver to install on your pc, client-side on your phone. Then, your phone will work as a remote display, completely recognized by windows as if it was plugged (but I'm not sure if you can "exploit" the remote screen informations on your code correctly). But still, it might help you somehow!

I'll try to take a look for a PR but I'm not sure if I'll be able to anytime soon. Thanks for the proposal, I'm keeping this project aside for later!